home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Skandinavian News 6
/
Skandinavian News - Issue 6 (1988-12)(Accession).adf
/
page23
< prev
next >
Wrap
Text File
|
2014-06-18
|
1KB
|
47 lines
#screen hires
#colors from "bootselect"
#pointercolor f00
#pens 1,0
#picture 0,80,"bootselect"
#move 0,0
BOOT FROM EXTERNAL DRIVE:
--------------------------------------
Connect yer external drive as usual on
the back of the Amiga.
Then open your computer.
But beware!Never touch any of the pins
with your fingers, if ya have to, just
touch the radiator. The descripted
8520 is not special sensitive, but you
better take care!!!!!!!!!
Find the chips, on which you see the
number 8520. There are two chips like
this. The one, we talk about is number
#move 325,0
UGN. This number is printed on the
chip.
After finding the chip, you'll have to
use the pins 12 and 13. Start counting
from the left to the right.
Now, connect these two chips with a
wire between pin 12 and 13.
To make it clearer to you, look on the
left on the drawing.
Select the right wire if you want to
boot from df1: or the left wire for
booting from the internal drive.
<ECS of Expert System>
--------------------------------------
I never tried it, but I am nearly sure
that it works. If you should be so
stupid as to damage the Amiga or if
there was an error in the description,
so that you damage your Amiga, neither
the SN nor the writer of the article
takes over any responsibility for any
causes of damage. But, don't panic, in
most probability it works. <EDITORS>